66" Refrigerators: Difference between revisions
From CTH Drafting Standards
(Created page with "The 66 Fridge option is a configuration of two 19 Cu. Ft. Single-Door Refrigerators, side by side. The configuration includes three different trim kits and they have special order end panels. The refrigerators can be found at G:\Shared drives\Drafting\SP-2022-libraries\COMPONENTS\66<nowiki>''</nowiki> Fridge. Pre-drawn plan views and elevation views are provided. There is also a PDF file, 66" refrigerator specs.pdf that shows the configurations. Each configuration is sl...") |
No edit summary |
||
| Line 7: | Line 7: | ||
Note that the drawings are sized for 90" tall cabinets. If taller cabinets are used then the end panels and front panels will need to be adjusted. | Note that the drawings are sized for 90" tall cabinets. If taller cabinets are used then the end panels and front panels will need to be adjusted. | ||
[[File:66 fridge example.jpg|none|thumb]] | [[File:66 fridge example.jpg|none|thumb]] | ||
== See Also == | |||
* [[Appliances]] | |||
[[Category:Appliances]] | |||
Revision as of 21:52, 16 April 2023
The 66 Fridge option is a configuration of two 19 Cu. Ft. Single-Door Refrigerators, side by side. The configuration includes three different trim kits and they have special order end panels.
The refrigerators can be found at G:\Shared drives\Drafting\SP-2022-libraries\COMPONENTS\66'' Fridge. Pre-drawn plan views and elevation views are provided. There is also a PDF file, 66" refrigerator specs.pdf that shows the configurations. Each configuration is slightly different in height but all are the same width.
You must select the proper trim kit. If none are specified please ask which one to use.
Note that the drawings are sized for 90" tall cabinets. If taller cabinets are used then the end panels and front panels will need to be adjusted.
