Borders: Difference between revisions

Revision as of 22:37, 14 March 2023

Copy AREA-NEW.spd to the project
Copy 3D.svw to Project Folder/View Files
User Information Defined Stamps - Reset to System
Finishing Options-Area Options - Reset to System
Reset all Drawing Templates
Double click on "3D" Saved 3D View
File/Render Options/Load "3D for Cover.mro"
File/Material File/Load "CTH.spm"
Set Sun Options: Enable Sun | 2/15/year 2:00 PM | 50,000 lux | Shadows, Diffuse, & Specular checked
Save All
Right click each existing Plan Set and delete
Right Click on Plan Sets and create the new Plan Sets from Templates.
Go to the Final Cover Sheet page. Wait for it to generate. If it looks right then done. If not then revise.
Project Options: Project Information. Fill in information if available
Project Options: User Information Defined Stamps. Fill in information if available

@@ Line 11: / Line 11: @@
 # Set Sun Options: Enable Sun | 2/15/year 2:00 PM | 50,000 lux | Shadows, Diffuse, & Specular checked
 # Save All
-# Right click each existing Plan Set and delete
+# Right click each existing [[Plan Sets|Plan Set]] and delete
-# Right Click on Plan Sets and create the new Plan Sets from Templates.
+# Right Click on [[Plan Sets]] and create the new Plan Sets from Templates.
 # Go to the Final Cover Sheet page. Wait for it to generate. If it looks right then done. If not then revise.
 # Project Options: Project Information. Fill in information if available
 # Project Options: User Information Defined Stamps. Fill in information if available