Triangular Corner Cabinet

You are here

5 posts / 0 new
Last post
Kratchmer
Kratchmer's picture
Triangular Corner Cabinet
SoftPlan Version:
2014

How do I draw a triangular base cabinet?  Softplan has a 'diagonal base' cabinet, but it still has sides, no matter how I set the dimensions or use the adjust tool to try and correct it.  Take a look at the picture.  The cabinet on the far right is the one I'm having trouble with. 

Larry
Larry's picture
might just try and use a

might just try and use a front instead of a whole cabinet.  Set it to any angle you want.  Then you can draw in your top.

Bill M
Bill M's picture
This must be something I have

This must be something I have missed..  How do you use just a front?

Bill Wimberley
Bill Wimberley's picture
Cabinet

You can use a Back Panel as Larry suggested. Or you could use a Diagonal Corner with a depth of 1".

Bill is the owner and maintainer of SoftPlanTuts.com

Kratchmer
Kratchmer's picture
I got it to work, thank you. 

I got it to work, thank you.  Working on trim calculations now.