Site Plan

You are here

6 posts / 0 new
Last post
rrubinski
rrubinski's picture
Site Plan
SoftPlan Version:
2016

When I draw Lot 15 Site Plan I can't get it to close. The only way that I can do it is to sketch the Property line over top of it with the cursor snap on.

 

Thanks

Rick

Bill Wimberley
Bill Wimberley's picture
Site

Since they did not provide the bearing for the 190' side I saved it till last. I started at the 20.21' straight line going into the curves. Then went through the curves, across the 166.65' side and back down the 158.35' side and stopped there. Then drew a line connecting the two end points. The result was a line of S 54 13'46" E 190.004'.

 

Bill is the owner and maintainer of SoftPlanTuts.com

rrubinski
rrubinski's picture
Site

I just assumed it the same as the 189.85' N54 13 35W, but as I look at some of the other interior lot lines they do have and coordinates either.

 

Thanks Bill you're amazing  

rrubinski
rrubinski's picture
Site

Bill, how do I draw the driveway to follow the curvature at the street?

 

 

Thanks

Rick

Bill Wimberley
Bill Wimberley's picture
Curvature

Draw the driveway as a polygon with two points touching the curve and a straight line between. Then edit the straight line and give it a radius to match the curve of lot.

rrubinski
rrubinski's picture
Site Plan

Bill thanks again

 

Thanks

Rick