Sheet rock where siding should be in 3d

You are here

6 posts / 0 new
Last post
Tom Sams
Tom Sams's picture
Sheet rock where siding should be in 3d
SoftPlan Version:
2014 Plus

Good Morning All. A curious thing is goin on with only one exterior wall on a house plan. It has baseboard and sheetrock except for the very ends which are siding.  I double checked all my settings and siding is selected and the wall is a 2x6 siding clad wall and I have the exterior and interior selected correctly.  I actually noticed the change after I applied some recepticals and switches.  However, I applied the same to other  walls without this issue.

 

Thanks, Tom

Bill Wimberley
Bill Wimberley's picture
Sheet rock where siding should be in 3d

Good morning Tom. Can you attach the affected project or at least an image showing what you are talking about?

Bill is the owner and maintainer of SoftPlanTuts.com

farwood
farwood's picture
Could ne you have a color

Could ne you have a color paint or something turned on in interior of room mode?

Tom Sams
Tom Sams's picture
Sheetrock on exterior of house

Sorry for the delay getting back with you. I took your advise and upgraded my video card today, do the computer has been o.o.c. today.  Anyway I'll look at it now and see if I can find anything, and this is the same house you looked at for me before and it should still be on the cloud. At least it says it's being updated ever time I close the project.

 

Tom

Bill Wimberley
Bill Wimberley's picture
Sheetrock on exterior of house

Tom, I see the problem. On the Main Floor switch to Interior Mode. Notice down on the Pantry wall that you have all of the interior polygons on the outside of the wall. Adjust them to be on the inside and your problem should be cleared up.

Tom Sams
Tom Sams's picture
Sheetrock

WaLa, worked like a charm. This happened when I manually traced the room in Room Mode.  Must be more careful next time. 

 

Thanks, Tom