SCALE

You are here

8 posts / 0 new
Last post
JasonDentDesign
JasonDentDesign's picture
SCALE
SoftPlan Version:
2014 Plus

Is there a way to have my scale displayed on every page as fractions  instead of decimal point style? Thanks so much!!

Bill Wimberley
Bill Wimberley's picture
Fractional Scale

You have to select a scale factor from the list of Standard scales. Any scale that is not in that list will show up as a decimal. The scale you have set is equivelant to 3/32"=1'. Try changing it to 1/8".

Bill is the owner and maintainer of SoftPlanTuts.com

JasonDentDesign
JasonDentDesign's picture
Where do I find them.

Where do I find them.

Bill Wimberley
Bill Wimberley's picture
Scale settings

With the drawing page open right click on the item that you want to set the scale for. Select Edit. The scale Options will be in the edit dialog box.

 

JasonDentDesign
JasonDentDesign's picture
Perfect thanks I'll give it a

Perfect thanks I'll give it a try.

JasonDentDesign
JasonDentDesign's picture
What I want to happen is the

What I want to happen is the 0.0938 to read on plan set as 3/32 not the decimal number.

Bill Wimberley
Bill Wimberley's picture
Standard Scales

3/32 is not one of the Standard scales. If you want to show that scale then you will have to just write it in with a note.

JasonDentDesign
JasonDentDesign's picture
Ok Thanks so much

Ok Thanks so much