Figuring out Square Footage of Walls

You are here

3 posts / 0 new
Last post
joni552
joni552's picture
Figuring out Square Footage of Walls
SoftPlan Version:
2014

Hi,

 

I am familiar with the area mode in Softplan - but is there a way to figure out the square footage of the walls of a specific room?  I have played around to see if I could figure it out - but I don't see where it is possible.  Please let me know at your convenience.

 

Your help is very much appreciated!

 

Thanks,

 

Joni

Bill Wimberley
Bill Wimberley's picture
Room Mode

Switch to Room Mode. On the Draw tab select Room and select the room type then click on the room. After you have your rooms added you can right click on each room and select Label then click where you want to place the label. This will give you the area and other information that is defined for each room.

Another method would be to use Interior Mode. Draw in the Flooring for each room then edit the flooring and it will give you the area.

Bill is the owner and maintainer of SoftPlanTuts.com

joni552
joni552's picture
Thank you very much, Bill!! 

Thank you very much, Bill!!